|
Post by Biffo on Jul 21, 2014 8:38:03 GMT
How do all?
First post and a FC freshman here, almost a week under my belt and keen to get involved in something that looks more fun than equities are at the moment...
However, I wonder if anyone is prepared to share some wisdom and experience?
I have spent a few days frowning at the secondary market and the variable discounts / premiums. I've read the helps, the formulae, the forum discussions here - and in The Other Forum and still the wrinkles reveal a dim laddie below.
Simple question (I hope): Does anyone have a tip buying on the secondary market at Funding Circle, should a buyer go for the lowest % rate or the highest, or what?
Thank you.
Look forward to taking part.
|
|
|
Post by yorkshireman on Jul 21, 2014 8:50:48 GMT
I wouldn’t touch the secondary market with a barge pole.
|
|
|
Post by davee39 on Jul 21, 2014 8:54:47 GMT
The secondary market can be a minefield. Some sellers will be dumping loans they think are suspect (late payments or other suspicions), some are trying to make a small profit and some are just trying to raise cash.
Rule 1 - Always look at the repayments tab. Avoid any loan which has ever been late in any repayment.
Rule 2 - If you have any doubts about a loan avoid it
Rule 3 - Loans purchased at or close the minimum bid rate may be hard to sell in the future, especially if MBR rises
Rule 4 - Look at the current rates for loans to avoid overpaying
Rule 5 - Never use Autobid, EVER
Rule 6 - Do not expect to be able to get all your cash back quickly, some loans may be restricted if the borrower gets into difficulties
Rule 7 - Spread your cash, you need lots of loans, not just a few big ones
Rule 8 - Have fun, Selecting and bidding on the primary market can be entertaining, but this is a RISK market, you can lose money if you are unlucky.
|
|
markr
Member of DD Central
Posts: 766
Likes: 426
|
Post by markr on Jul 21, 2014 9:00:52 GMT
As a disclaimer I perhaps should say I rarely buy on the secondary market, but here's my views.
1. Many investors (me included) use the secondary market to sell loan parts that we aren't happy with, often ones that have come back after a few late payments. Before buying a loan part, check the comments in the "repayments" tab and avoid any with a history of "we are chasing the borrower" type comments. Late first payment is often a direct debit issue and if subsequent payments have been ok then those loans are worth considering.
2. There are now several "buy bots", programs that automatically scour the secondary market for high rate parts, which they snap up instantly. So it is not really possible for a manual buyer to find "bargains" on the SM, but it is possible to buy reasonable parts at a fair price which is what the SM was intended for.
3. If a loan part repays early then you could lose money if you pay too high a premium. Also, buying parts with a 3% markup gives no leeway to resell those parts at a profit later so while going for buyer rate is a reasonable aim, be a bit wary of paying too high a premium.
4. The SM at the moment is stuffed full of property loans being offered at deep discounts (these loans were offered with 2% cashback, so flippers can resell these with up to about 1.7% discount and still make a profit. Personally, I think these loans, especially the shorter duration ones, are generally good value and would happily buy them at 1.5% or more discount (and have done when I have missed the auctions and failed to get any on the primary market). You'll probably not be able to resell these parts, though, so consider this if you think you may need your capital quickly.
Hope that helps a bit.
|
|
|
Post by Biffo on Jul 22, 2014 11:49:50 GMT
Thank you chaps, I like the Yorkshireman's advice, especially on the placing of a barge pole.
|
|
adrianc
Member of DD Central
Posts: 9,945
Likes: 5,123
|
Post by adrianc on Jul 23, 2014 8:47:17 GMT
Well, this is probably as good a place as any to say Hello...
I dipped a toe in to the FC waters a month or so ago, and after an initial AutoBid semi-debacle (lots of cash tied up at ho-hum bid rates before being returned but which, at least, gave me a good way to test out loan part sales!), I think I've got it reasonably understood.
I've bought in at a few primary sales at decent rates, but most of my parts have been bought on the secondary - at rates far higher, even after premiums, than I've seen on primary in that time. Mostly As, with a good smattering of A+s and the odd B (I've avoided C and C- totally), I'm sitting at a gross of ~11%. Because I've bought on the secondary at, often, highish premiums - yes, the fees paid have been high - the fully diversified is "only" a bit over 8% at the moment. Yes - all in all, after a month, the total I have in the account is down a tidge - less than 0.5% of what went in. That's OK by me, it's climbing back to that point quickly enough, and it's been a cheap enough learning curve.
My secondary buying strategy has been to use the filters to search by the effective rate to find the highest (the rate shown is, of course, after the effects of the premium/discount), then have a good once-through the details. Repayment comments? Avoid, except for obvious first-repayment admin errors. Don't like the numbers (I'm no accountant, but I do have a basic clue)? Avoid. Rate for this part anywhere except near the top for that loan? Avoid.
No, it's not a strategy that'll scale terribly well towards large investments. But, so far, it seems to be delivering a perfectly acceptable return whilst getting the money doing something reasonably quickly, and minimising both the risk (I've got max £20 in any one loan) and the amount of sitting there at auction-end trying to second-guess the inflow of botcash then waiting a week for the loan to be rejected by the borrower...
Have a drink on me, flipperbotters...
|
|
|
Post by longjohn on Jul 24, 2014 18:26:12 GMT
I used to buy on the secondary market when the rates were good but since the best parts are now creamed off as soon as they are posted I'm no longer a buyer. I generally have about 10% of my parts up for sale at any one time. None of them are in any way bad and I'm not selling to raise cash to exit FC. These are merely speculative sales so that I get a few pence profit per sale and the buyer gets a reasonable rate of return. The money raised is quickly reinvested (I like bidding). I'm not concerned if the parts fail to sell and I'm happy to let the loan ride out to the end. I'm not a flipper so the parts will be at least a year old and maybe quite a bit older. No barge pole required if you buy my parts. John
|
|
|
Post by GSV3MIaC on Jul 24, 2014 21:11:46 GMT
Secondary market pros .. you can take your time over reviewing the loan, and probably some payment history, you can be sure your money is going to be earnng interest 'at once', you can usually pick up parts at well above the 'average rate' for the loan.
Cons - some folks dump dross (but usually at 0% since autobidders are not selective and don't read repayment history), 'old parts' are (statistically) more likely to default than 'newer ones', you may have to pay a premium (but you have a choice often - you can buy a 9% part in loan X at par, or you can buy a 11.5% part in the same loan at a premium .. you pick!) which you can lose if the loan repays early, you may not be able to buy what you want if nobody is selling.
I buy occasionally, if I see a bargain the bots haven't already eaten, and have a lot of (newish) parts for sale at any one time, but I don't get frantic if they don't sell (unless FC comes along and invents an MBR overnight, like they did last year! That caused some frantic selling at the time).
|
|
|
Post by Biffo on Aug 2, 2014 17:26:13 GMT
Another TLA...
MBA? (sotto voce, minimum borrowing rate?)
Thanks all for helpful comments, much to digest - when I get my barge-pole back.
|
|
mikeb
Posts: 1,071
Likes: 472
|
Post by mikeb on Aug 2, 2014 18:02:11 GMT
MBR = Minimum Bid Rate
(It used to go 4%-15%, irrespective of risk band, now you are nannied into bidding at least A+/6.0%, A/8.0%, B/9.0%, C/10.2% and C-/12.0%)
Maximum is still 15%. Mind your head as they crank up the minimum, but leave the maximum at 15% ...
|
|